Removing Axkid MINIKID 4 car seat from the vehicle

Tip:

Lock the harness buckle and tension the harness before removing the car seat from the vehicle. You can then use the shoulder straps (R) as a carrying handle, making it easier to lift out the car seat and transporting it outside of the vehicle.

Important:

Never carry the car seat by holding in the headrest (A).


Unzip the zipper and open the belt clamp lid (O). Unlock the vehicle seat belt by pressing the red button on the seat belt buckle. Open the belt clamp (N) and pull the vehicle seat belt and guide it through the seat belt slots (D) to remove it from the car seat.
Unlock the lower tethers (M) by holding on to the connectors with your hand and pressing on the grey button with your thumb. While keeping the connector in your hand, slowly feed it back to the car seat. Be careful not to let go of the lower tether connector, as it will retract back automatically with high speed.
Push the support leg button (Q) and collapse the support leg (P) to its shortest position.
Press the recline adjustment lever (G) and push in the recline angle adjuster (T) to its shortest position. Lift the Axkid MINIKID 4 MAX out of the vehicle.