Safety information

Axkid Up is a forward-facing car seat approved for children with a height between 100–150 cm.

Axkid Up is suitable to use from approximately 4 years of age, or when the child is 100 cm in height.

Axkid Up is a forward-facing i-Size booster seat. It is approved according to UN Regulation No. 129, for use in i-Size compatible vehicle seating positions as indicated by vehicle manufacturers in the vehicle's user manual. If in doubt, consult either the Enhanced Child Restraint System manufacturer (www.axkid.com) or the retailer.
Warning:
An incorrect installation may seriously affect the safety for the child.
  • Always follow the instructions in this manual. If in any doubt, scan the QR code or contact the retailer where the car seat was purchased or info@axkid.com for a demonstration of a correct installation.
  • For the latest version of the instruction manual, visit www.axkid.com/manuals.
  • Do not use the car seat in a seating position where an active frontal airbag is fitted. To install the car seat in this location the airbag must be switched off according to the vehicle manufacturer's instructions.
  • In case of an accident, no matter how small, the car seat should always be replaced. It may have damage that is not visible and could seriously affect the safety of the child.
  • If the car seat has been exposed to direct sunlight, make sure the car seat is not too hot before installing the child.
  • Never leave the child unattended in the vehicle.
  • Ensure that any luggage or loose objects are secured in the vehicle as they may cause injuries to passengers in the event of an accident.
  • Ensure that the car seat is installed in a way where no parts become trapped by movable seats, car doors, etc.
  • Make sure there is no twist in the seat belt.
  • Do not attempt to disassemble or modify any part of the car seat. The warranty and the safety performance of the car seat could be affected if doing so.
  • Never use the car seat without the textile cover. The textile cover is a safety feature and may only be replaced with an Axkid original seat textile cover.
  • Read the vehicle handbook and the vehicle list at www.axkid.com to find which seating positions are suitable for this car seat.
  • Axkid recommends to always use a seat protection to protect the vehicle seat from scratches and dirt.
  • The car seat must only be installed forward-facing.
  • Always make sure that the seat belt is adjusted to correctly fit the child's body.
  • Make sure that the child's back is pushed against the car seat before restraining the child with the seat belt.
  • After restraining the child in the car seat, always make sure that the lap belt is positioned low on the hip and firmly engaged with the child's pelvis.
  • When using the support leg, make sure the support leg is in the correct position and has contact with the vehicle floor.
  • Never carry the car seat by holding the headrest.