If using the support leg: push the support leg adjustment button
(G) and raise the lower part of the support leg.
If using ISOFIX: release the ISOFIX connectors (H) by pushing
both ISOFIX adjustment buttons (J) and retract the ISOFIX
connectors (H).
Lower the seat height if raised. Pull and lift the lumbar
support (C) upwards to open the hatch in the seat. Adjust
the seat downwards by holding the seat adjustment handle (K)
and activating the seat adjustment button (L). Close the
hatch and fold back the lumbar support (C).
Fully extend the backrest into an upright position, pull the two
backrest locks (P) upwards simultaneously and fold down the
backrest.
Grab the carrying handle (U) and remove the car seat from the
vehicle.
Fold the support leg up into its storage compartment.
