Installation without ISOFIX or Support leg


	Using no ISOFIX or support leg (only seatbelt) If the vehicle seat position is not fitted with ISOFIX attachment points; the only option is to install the Axkid Up car seat using only the vehicle seat belt. If doing so, the support leg must not be used and should remain in the storage compartment. « Choose installation method


Secure the placement Place the Axkid Up car seat on the vehicle seat. Fold up the back support until it clicks into place. Press the Axkid Up car seat as close as possible against the vehicle seat.
Attach the seat belt Pull out the vehicle seat belt and route the shoulder belt through the upper belt guide (M) and the lap belt under the lower belt guide (Q).
Install the ASIP pad Install the ASIP pad (N) on the side of the car seat closest to the vehicle door. Align the ASIP pad attachment with the ASIP holder and attach it by pushing and rotating it into place.